Mitutoyo Dial Indicator Flat Back Jeweled Bearing 20mm Range | 0.01mm Graduation
SERIES 2 — Long Stroke Type
• Long stroke dial indicators with a ø57 mm bezel.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and the spindle are made of high strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is employed.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
• The bezel clamp and lifting lever* (optional) can be attached to either the right or left side. These parts can be easily installed and removed without any tools.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Type: EN ISO Standard
Delivered: With certificate of inspection
Range: 20 mm
Range per rev.: 1 mm
Dial reading: ±0-100
Graduation: 0.01 mm
MPE any 1/10 revolution: 8 µm
MPE any 1/2 revolution: 10 µm
MPE any 1 revolution: 15 µm
MPE measuring range: 20 µm
H MPE (Hysteresis): 5 µm
R MPE (Repeatability): 4 µm
Measuring force: 0.4-2 N
Mass: 140 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Cushioned end point: Yes
Jeweled bearing: Yes
Shockproof: Yes
Model #: 2050AB-19
MADE IN JAPAN
SERIES 2 — Long Stroke Type
• Long stroke dial indicators with a ø57 mm bezel.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and the spindle are made of high strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is employed.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
• The bezel clamp and lifting lever* (optional) can be attached to either the right or left side. These parts can be easily installed and removed without any tools.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Type: EN ISO Standard
Delivered: With certificate of inspection
Range: 20 mm
Range per rev.: 1 mm
Dial reading: ±0-100
Graduation: 0.01 mm
MPE any 1/10 revolution: 8 µm
MPE any 1/2 revolution: 10 µm
MPE any 1 revolution: 15 µm
MPE measuring range: 20 µm
H MPE (Hysteresis): 5 µm
R MPE (Repeatability): 4 µm
Measuring force: 0.4-2 N
Mass: 140 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Cushioned end point: Yes
Jeweled bearing: Yes
Shockproof: Yes
Model #: 2050AB-19
MADE IN JAPAN
SERIES 2 — Long Stroke Type
• Long stroke dial indicators with a ø57 mm bezel.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and the spindle are made of high strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is employed.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.
• The bezel clamp and lifting lever* (optional) can be attached to either the right or left side. These parts can be easily installed and removed without any tools.
Technical Data:
Digital/Analog: Analog
Inch-Metric: Metric
Type: EN ISO Standard
Delivered: With certificate of inspection
Range: 20 mm
Range per rev.: 1 mm
Dial reading: ±0-100
Graduation: 0.01 mm
MPE any 1/10 revolution: 8 µm
MPE any 1/2 revolution: 10 µm
MPE any 1 revolution: 15 µm
MPE measuring range: 20 µm
H MPE (Hysteresis): 5 µm
R MPE (Repeatability): 4 µm
Measuring force: 0.4-2 N
Mass: 140 g
Stem: 8 mm
Contact point: Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous dial: Yes
Cushioned end point: Yes
Jeweled bearing: Yes
Shockproof: Yes
Model #: 2050AB-19
MADE IN JAPAN